Precision Planetary Gearbox PL42
Indications Of The Models
① Square mounting flange series
② The outer dimension of planetary gearbox is 42mm
③ Reduction ratio
1 stage: 04, 05, 07, 010
2 stages: 015, 016, 020, 025, 028, 030, 035, 040, 050, 070, 100
④ MA: For servo motor which mounting holes' center Dia. is φ 45 mm.
⑤ MB: For servo motor which mounting holes' center Dia. is φ 46 mm.
⑥ 13: The diameter of the output shaft of the gearbox is 13mm. The default output shaft of the gearbox is 10mm
Dimension Table
| Product Type | PLS42-L1/L2MA | PLS42-L1/L2MB | PLS42-L1/L2MA13 | PLS42-L1/L2MB13 | PLS42-L1/L2MD |
|
|
| Number of stages | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 |
|
| L1 Housing Length (mm) | 51 | 62 | 51 | 62 | 51 | 62 | 51 | 62 | 49 | 60 |
|
| D1 Adapted motor shaft diameter | 8 |
|
| D2 Spigot diameter | 30 | 38.1 |
|
| D3 mounting hole‘s center Dia. | 45 | 46 | 45 | 46 | 47.14 |
|
| D4 Output shaft diameter | 10 | 13 | 10/13 |
|
| S1 mounting hole thread and depth | M3*8 | M4*8 | M3*8 | M4*8 | M4*10 |
|
Remark:
1.HPS42 standard series reducer different models, only the above 5sizes will change.
2.The output shaft size, input size, installation size, etc. of the reducer can be customized according to the actual use of customers.
Performance Parameters
| Product Type | PL42 | Ratio | Number of Stage |
| Nominal Output Torque（T） | N.m | 9 | 4 | 1 |
| 9 | 5 |
| 5 | 7 |
| 5 | 10 |
| / | / | 2 |
| 12 | 16 |
| 12 | 20 |
| 10 | 25 |
| / | / |
| 10 | 35 |
| 10 | 40 |
| 10 | 50 |
| 10 | 70 |
| 5 | 100 |
| Instant Stop Torque | N.m | Twice of the rated torque |
| Nominal Input Speed | rpm | 3000 |
| Max Input Speed | rpm | 6000 |
| Max Radial Load | N | 300 |
| Max Axial Load | N | 100 |
| Effciency | ％ | 96% | 1 |
| 94% | 2 |
| Backlash | arcmin | ≤15 | 1 |
| ≤20 | 2 |
| Noise | dB | ≤55dB |
| Protection Level | IP | IP54 |
| Life Time | H | 20000H |
| Ambient Temp | ℃ | -20° ~ +150° |
| Lubrication Method | | Permanent Lubrication |
| Weight | kg | ≈0.40 | PLS42-L1MA13/MB13 |
|
| ≈0.52 | PLS42-L2MA13/MB13 |
|
Precision Planetary Gearbox PL60
Indications Of The Models
① Round mounting flange series
Square mounting flange series
② The outer dimension of planetary gearbox is 60mm
③ Reduction ratio
1 stage: 04, 05, 07, 010
2 stages: 016, 020, 025, 028, 035, 040, 050, 070, 100
④ MA: Standard flange, for 400W servo motor, install threaded holes M4
⑤ MB: Standard Flange, for Nema 23 step motor
⑥ MA: Standard flange, for 400W servo motor, install threaded holes M5
Dimension Table
| Product Type | PL60-L1/L2MA | PL60-L1/L2MB | PL60-L1/L2MC |
|
|
| Number of stages | 1 | 2 | 1 | 2 | 1 | 2 |
|
| L1 Housing Length (mm) | 73.5 | 89.5 | 73.5 | 89.5 | 73.5 | 89.5 |
|
| L2 Spigot depth | 5 | 4.5 | 5 |
|
| L3 Mounting holes' center Dia.
| φ70 | φ47.14 | φ70 |
|
| D1 Adapted motor shaft diameter | 14 | 8 | 14 |
|
| D2 Spigot Dia. | 50 | 38.1 | 50 |
|
| S1 mounting hole thread and depth | M4*12 | M4*12 | M5*12 |
|
Remark:
1.HPS42 standard series reducer different models, only the above 5sizes will change.
2.The output shaft size, input size, installation size, etc. of the reducer can be customized according to the actual use of customers.
Performance Parameters
| Product Type | PL60 | Ratio | Number of Stages |
| Nominal Output Torque（T） | N.m | / | / | 1 |
| 25 | 4 |
| 28 | 5 |
| 20 | 7 |
| 10 | 10 |
| / | / | 2 |
| 30 | 16 |
| 30 | 20 |
| 32 | 25 |
| 30 | 28 |
| / | / |
| 30 | 35 |
| 25 | 40 |
| 25 | 50 |
| 20 | 70 |
| / | / |
| Instant Stop Torque | N.m | Twice of the rated torque |
| Nominal Input Speed | rpm | 3000 |
| Max Input Speed | rpm | 6000 |
| Max Radial Load | N | 450 |
| Max Axial Load | N | 230 |
| Effciency | ％ | 96% | 1 |
| 94% | 2 |
| Backlash | arcmin | ≤10 | 1 |
| ≤15 | 2 |
| Noise | dB | ≤55dB |
| Protection Level | IP | IP54 |
| Life Time | H | 20000H |
| Ambient Temp | ℃ | -20° ~ +150° |
| Lubrication Method | | Permanent Lubrication |
| Weight | kg | ≈0.85 | PL60-L1MA/MB/MC |
|
| ≈1.10 | PL60-L2MA/MB/MC |
|
Precision Planetary Gearbox PL80
Indications Of The Models
① Square mounting flange series
② The outer dimension of planetary gearbox is 80mm
③ Reduction ratio
1 stage: 04, 05, 07, 010
2 stages: 016, 020, 025, 028, 035, 040, 050, 070
④ MA: Standard flange, suitable for 750W servo motor, install threaded holes M5
⑤ MB: Standard Flange, adapt to 86 -step motor
⑥ MC: Standard flange, suitable for 750W servo motor, install threaded holes M6
Dimension Table
| Product Type | PLS80-L1/L2MA | PLS80-L1/L2MB | PLS80-L1/L2MC |
|
|
| Number of stages | 1 | 2 | 1 | 2 | 1 | 2 |
|
| L1 Housing Length (mm) | 109 | 132 | 109 | 132 | 109 | 132 |
|
| L2 Mounting holes' center Dia.
| φ90 | φ69.6 | φ69.6 |
|
| D1 Adapted motor shaft diameter | 19 | 14 | 14 |
|
| D2 Spigot Dia. | 70 | 73 | 73 |
|
| S1 mounting hole thread and depth | M5*12 | M5*12 | M6*12 |
|
Remark:
1.HPS80 standard series reducer different models, only the above 5 sizes will change.
2.The output shaft size, input size, installation size, etc. of the reducer can be customized according to the actual use of customers.
Performance Parameters
| Product Ttype | PLS80 | Ratio | Number of Stages |
| Nominal Output Torque（T） | N.m | / | / | 1 |
| 80 | 4 |
| 90 | 5 |
| 60 | 7 |
| 39 | 10 |
| / | / | 2 |
| 90 | 16 |
| 90 | 20 |
| 100 | 25 |
| 90 | 28 |
| / | / |
| 100 | 35 |
| 90 | 40 |
| 100 | 50 |
| 70 | 70 |
| / | / |
| Instant Stop Torque | N.m | Twice of the rated torque |
| Nominal Input Speed | rpm | 3000 |
| Max Input Speed | rpm | 6000 |
| Max Radial Load | N | 1000 |
| Max Axial Load | N | 800 |
| Effciency | ％ | 96% | 1 |
| 94% | 2 |
| Backlash | arcmin | ≤10 | 1 |
| ≤15 | 2 |
| Noise | dB | ≤55dB |
| Protection Level | IP | IP54 |
| Life Time | H | 20000H |
| Ambient Temp | ℃ | -20° ~ +150° |
| Lubrication Method | | Permanent Lubrication |
| Weight | kg | ≈0.2.90 | PLS80-L1MA/MB/MC |
| ≈3.70 | PLS80-L2MA/MB/MC |
90 Series Precision Planetary Gearbox
Indications Of The Models
① Square mounting flange series
② The outer dimension of planetary gearbox is 90mm
③ Reduction ratio
1 stage: 04, 05, 07, 010
2 stages: 016, 020, 025, 028, 035, 040, 050, 070
④ MA: Standard flange, for 750W servo motor, install threaded holes M4
⑤ MB: Standard Flange, for Nema 34 step motor
⑥ R12.7: For the input shaft size, the default one is 14mm
Dimension Table
| Product Type | PLS90-L1/L2MA | PLS90-L1/L2MB | PLS90-L1/L2MB-R12.7 |
|
|
| Number of stages | 1 | 2 | 1 | 2 | 1 | 2 |
|
| L1 Housing Length (mm) | 110 | 132 | 110 | 132 | 110 | 132 |
|
| L2 Mounting holes' center Dia.
| φ90 | φ69.6 | φ69.6 |
|
| D1 Adapted motor shaft diameter | 19 | 14 | 12.7 |
|
| D2 Spigot Dia. | 70 | 73 | 73 |
|
| S1 mounting hole thread and depth | M6*12 | M5*12 | M5*12 |
|
Remark:
1.HPS90standard series reducer different models, only the above 5 sizes will change.
2.The output shaft size, input size, installation size, etc. of the reducer can be customized according to the actual use of customers.
Performance Parameters
| Product Type | PLS90 | Ratio | Number of Stages |
| Nominal Output Torque（T） | N.m | / | / | 1 |
| 80 | 4 |
| 90 | 5 |
| 60 | 7 |
| 39 | 10 |
| / | / | 2 |
| 90 | 16 |
| 90 | 20 |
| 100 | 25 |
| 90 | 28 |
| / | / |
| 100 | 35 |
| 90 | 40 |
| 100 | 50 |
| 70 | 70 |
| / | / |
| Instant Stop Torque | N.m | Twice of the rated torque |
| Nominal Input Speed | rpm | 3000 |
| Max Input Speed | rpm | 6000 |
| Max Radial Load | N | 1000 |
| Max Axial Load | N | 800 |
| Effciency | ％ | 96% | 1 |
| 94% | 2 |
| Backlash | arcmin | ≤10 | 1 |
| ≤15 | 2 |
| Noise | dB | ≤55dB |
| Protection Level | IP | IP54 |
| Life Time | H | 20000H |
| Ambient Temp | ℃ | -20° ~ +150° |
| Lubrication Method | | Permanent Lubrication |
| Weight | kg | ≈0.2.90 | PLS90-L1MA/MB/R12.7 |
| ≈3.70 | PLS90-L2MA/MB/R12.7 |
Language
Language
